How To Fix A Leaky Hose On Kitchen Faucet. Once you're past the leak, repeat the procedure in the opposite direction. Unscrew the packing nut beneath the handle of the faucet.
Next, pull the hose out through the faucet spout above and then feed the new hose back down the faucet spout in the same way. If you are lucky, you will only need to tighten a loose cartridge nut to stop the leak. Pull off the “o” ring.
Table of Contents
Unscrew The Coupling At The End Of The Hose With Either A Pair Of Pliers Or Wrench, If This Is Where The Leak Is Coming From.
Is your pull out faucet leaking or difficult to operate? Slide a basin wrench up to one of the nuts holding the base to the sink. I don’t think you can.
Tried That ‘Flex Tape’ They Advertise O.
Wrap the hose with repair tape, if this leak is coming from the middle of the hose. Stretch the ring off the spout and pull it out of the faucet. Next, pull the hose out through the faucet spout above and then feed the new hose back down the faucet spout in the same way.
It Got That Little Stream Of Water Leak You Spoke Of Right Where The Metal Part Of The Spout And The Flex Tubing From The Water Line Attaches.
This is the most common moen kitchen faucet. I have one of those kitchen faucets with the pull down spout. If you find a leak at the crimp, replace the hose.
Check The Spray Hose By Turning On The Faucet And Turning It Off When You Have Found The Damaged Spot.
If you are lucky, you will only need to tighten a loose cartridge nut to stop the leak. Look for the water shut off valves underneath the kitchen sink and turn them off. Pull off the “o” ring.
The Part Number Of The Sprayhead Hose Will Vary Depending On The Faucet Model Number.
Push the valve stem back into the hose bibb housing. Loosen and remove both supply lines by turning the nuts counterclockwise with the adjusted wrench. Wrap the threads on the coupling connection with plumber’s tape.