close
close

How To Relight A Pilot Light On A Furnace

0 Comments

How To Relight A Pilot Light On A Furnace. Once you are sure the pilot light is on, release your pressure on the reset button. Companies that deliver natural gas and propane have added a component called mercaptan that.

Learn How to Light a Furnace Pilot Light When Needed from www.centralhtg.com

Turn the switch or knob to “pilot” and hold down the reset button. How to light a furnace pilot howstuffworks. If the pilot light won’t stay lit, the opening may be clogged.

To Relight A Pilot Light, You Must First Shut Off The Gas Flow Through The Furnace.

Keep this button depressed until the pilot flame burns brightly. Once the pilot light is relit and you’ve released the reset button, your furnace should fire up automatically. Light a lighter or match, then push in the reset button.

This Is Where You Will Light The Fire.

In this way, how do you relight a pilot light on a furnace? Before doing anything else, check for any signs of a gas leak. Then, hold down the reset button and bring the flame of a.

Turn The Knob To Pilot;

Then, turn the gas valve to the furnace and shut off the access panel. Turn the knob to “pilot” and hold down the “reset” button. Using a long lighter, bring the flame close to the pilot opening.

Wait For 10 Minutes For The Furnace To Fully Shout Down.

Turn the switch or knob to “pilot” and hold down the reset button. If the pilot light won’t stay lit, the opening may be clogged. It is located near the gas burners and will usually have a gas cock or valve knob that reads on, pilot, and off.

Make Sure That The Vent Fan Is Turned On To Prevent A Fire.

Once you are sure the pilot light is on, release your pressure on the reset button. How to light a furnace pilot howstuffworks. How to relight a pilot light on a furnace.


Leave a Reply

Your email address will not be published.