Please Don’t Pay Exuberant Dealer Fees To Have The Dealer Do What You Can Do Yourself.

The installation went per the instructions which i have attached (skipping the hood switch install steps). Black/red vehicle ignition wire location: But i can't find any wiring diagram for it.

Range Is The Same As Your Oem Key.

Vehicle second ignition wire (+): No need to cut or splice wires. Vehicle second ignition wire (+):

The Turn Signal Lights Flash Multiple Times And The Engine Starts.

System installation requires 1 plug in connection and 1 traditional connection. It uses a multiple micro controller and bus architecture. If not i’d go with a professional install, used a 2 way viper on our 16 rav4, great range and consistent.

Videos You Watch May Be.

This car was a basic 2004 camry le with the 4 cylinder engine, automatic transmission, no factory alarm, no auto headlights and no transponder based engine immobilizer. Remote start functionality is activated by press the lock button 3 times on the factory key fob; There are 4 basic steps to this remote start installation.

Vehicle Battery Positive Wire (+):

Install the hood switch with the switch lever underneath the hood lock trigger lever. Need to know where all the components go? Press lock 3 times on the oem key fob;